TM 5-3895-376-14&P
5-9. VALVES MAINTENANCE INSTRUCTIONS
This task includes
d. Repair
a. Remove
b. Cleaning
e. Installation
c. Inspection
INITIAL SETUP
Materials/Parts
Tools
Tool Kit, General Mechanic's
Solvent, Dry Cleaning; item 9, Appx E
Gauge Depth Micrometer; item 12, Appx F
Seal, Valve (2)
Lifter, Valve Spring; item 18, Appx F
Equipment Condition
Indicator, Dial; item 17, Appx F
Compactor set on level ground in a protected area
Grinding Machine, Valve Face; item 15, Appx F
Engine off.
Press, Arbor (Puller Kit and Press Frame); item 21,
General Safety Instructions
Pressing Rod; item 22, Appx F
Observe all WARNINGS and CAUTION.
REMOVE
Remove air cleaner (Para. 4-27).
1.
2.
Remove muffler (Para 4-31)
Remove valve cover (Para 4-33).
3.
4
Disconnect fuel lines from the fuel Injector (Para.
5.
Remove fuel Injector (Para. 5-4).
6.
Remove rocker arms and push rods (Para 5-7)
7
Remove the cylinder head assembly (Para. 5-8).
8.
Remove the exhaust valve (2) as follows.
WARNING
Valve springs and collars are under
spring tension and can act as projec-
tiles when released and could cause se-
vere eye injury. Eye protection is
required.
a.
Using a valve spring lifter, compress the
valve spring (4) and remove the valve spring
retainer (1) halves.
5-18
