7
6
9
10
8
8
10
8
TM 9-4940-568-34
7-77
(15)
The timing pin hole (6) in the cam gear
should be visible or felt through the back
side of the gear housing (7). If not, the
crankshaft must be rotated on revolution in
the direction of engine rotation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(16)
Remove timing pin from old gear housing
(Para 5-6).
(17)
Apply a coat of sealing compound to the
threads of two screws (8) and install gasket
(9) and timing pin (10) on gear housing (7).
(18)
Hold the timing pin (10) in the hole to align
the housing. Tighten two screws (8) to 4
lb-ft (5 N.m).
