TM 9-4940-568-34
7-81
Use extreme care when removing
or installing spring retaining
rings. Spring retaining rings are
under tension and can act as
projectiles when released
suddenly. Ensure proper eye
protection is worn to prevent
injury to personnel.
(6)
Remove retaining ring (14) from shaft (15).
(7)
Remove six screws (16), lockwashers (17)
and washers (18) from end bell (19) and
generator (3). Discard lockwashers.
NOTE
Note position of wire lead prior
to removal.
(8)
Remove end bell (19) from generator (3).
(9)
Install PMG mount screw (11) into shaft
(15).
(10)
Remove rotor assembly (20) from
generator (3) from fan.
NOTE
Bearing may need to be pressed
out for removal.
(11)
Remove bearing (21) from rotor assembly
(20).
NOTE
If pin is damaged, perform Step
(12).
(12)
Remove pin (22) from rotor assembly (20).
3
11
15
14
16
17
18
19
15
20
3
21
20
22
