TM 9-4940-568-34
7-79
This task covers:
a. Disassembly
b. Assembly
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Generator set removed, (Para 5-3)
Batteries disconnected, (TM 9-4940-568-10)
Tools and Special Tools
Tool Kit, General Mechanics
(Item 67, Appendix F)
Cap and Plug Set (Item 6, Appendix F)
Wrench, Torque (0 to 300 lb-ft [0-470 N.m])
(Item 84, Appendix F)
Lifting Device, Minimum Capacity 500 lbs
(227 kg)
Wooden Blocks (4) (Appendix C)
7-10. GENERATOR REPAIR.
Personnel Required
Two
Materials/Parts
Cable Ties (Item 5, Appendix B)
Lockwasher (Item 52, Appendix E)
Lockwashers (4) (Item 51, Appendix E)
Lockwashers (6) (Item 49, Appendix E)
a.
Disassembly.
1
2
3
4
5
3
NOTE
Use wooden block to hold fan in position.
(1)
Remove eight screws (1) and three drive disks (2) from generator (3).
(2)
Remove four screws (4) and end bell cover (5) from generator (3).