2
1
3
6
TM 9-4940-568-34
7-72
7-9. FRONT GEAR HOUSING REPLACEMENT (CONT).
If a housing or other than the
original housing is installed, the
timing pin assembly must be
accurately located. Refer to
(Para 5-6).
(3)
Carefully position the gear housing (2) and
ensure gasket (3) is in place and install 11
gear housing screws (1). Tighten screws to
18 lb-ft (24 N.m).
(4)
Lubricate the camshaft and thrust washer (6)
with grease.
NOTE
Ensure the alignment marks on
the camshaft and camshaft gears
are aligned.
(5)
Install the camshaft and thrust washer
(Para 7-7).
