TM 5-3805-296-23-1
0037
Table 1. 0562 Module Communication Diagnostic Codes Continued.
037
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
8. Install instrument panel cover
0562-09 Caterpillar
(Figure 6, Item 3) with six washers
Monitoring System
(Figure 6, Item 2) and bolts
Abnormal Update Rate
(Figure 6, Item 1) on ROPS
Continued
(Figure 6, Item 4).
Figure 6. Instrument Panel Cover and Retaining Hardware.
0037
Test Step 15. Test Main Cab Wiring
Harness for High Resistance or
Open.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector P-C1
(WP 0012, Figure 253)
from connector W-C7
(WP 0012, Figure 252).
3. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 16.
between connector W-C7
Resistance Greater Than 5.0 Ohms
terminal 39 (WP 0012, Figure 252)
Replace main cab wiring harness
and ground.
(WP 0505).
Proceed to Test Step 17.