TM 5-3805-296-23-1
0037
Table 1. 0562 Module Communication Diagnostic Codes Continued.
037
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0562-09 Caterpillar
Monitoring System
Abnormal Update Rate
Continued
Figure 4. Cab Step.
0037
3. Inspect ground point of cab wiring
Ground Point or Ring Terminal Dirty
harness (WP 0012, Figure 316) for
or Corroded Clean as necessary.
dirt, corrosion, and damage.
Proceed to Test Step 17.
Ring Terminal Defective Replace
main cab wiring harness (WP 0505).
Proceed to Test Step 17.
No Problem Found Install main cab
wiring harness on ground point
(WP 0505). Proceed to Test Step 14.
Test Step 14. Verify if Code is Still
Active.
1. Ensure all harness connectors are
connected.
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
