TM 5-3805-296-23-1
0030
Table 1. 0262 Five-Volt Sensor Supply Diagnostic Codes Continued.
030
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 1. Test for Shorted Engine
0262-04 Five-Volt Sensor DC
Interface Wiring Harness, Fuel Filter
Supply Voltage Below
Wiring Harness, or Fuel Pressure
Normal Continued
Sensor.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Remove four bolts
(Figure 3, Item 1), washers
(Figure 3, Item 2), bushings
(Figure 3, Item 3), and splash
shield (Figure 3, Item 4) from
machine.
Figure 3. Splash Shield and Retaining Hardware.
0030
3. Disconnect connector CL-C10
(WP 0012, Figure 32) from
connector CM-C11
(WP 0012, Figure 31).
4. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
262-4 Five-Volt Sensor DC Supply
5. At MSD, check for active
Voltage Below Normal Remains
diagnostic code 262-4 Five-Volt
Active Proceed to Test Step 2.
Sensor DC Supply Voltage Below
262-4 Five-Volt Sensor DC Supply
Normal (WP 0008).
Voltage Below Normal Becomes
Inactive Proceed to Test Step 6.
Test Step 2. Test for Shorted Oil
Pressure Sensor.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
