TM 5-3805-296-23-1
0030
Table 1. 0262 Five-Volt Sensor Supply Diagnostic Codes Continued.
030
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0262-04 Five-Volt Sensor DC
5. Using digital multimeter
Continuity Replace engine interface
Supply Voltage Below
(WP 0540), test for continuity
wiring harness (WP 0211).
Normal Continued
between connector CL-C9
Proceed to Test Step 8.
terminal 3 (WP 0012, Figure 33)
No Continuity Replace fuel filter
and ground.
wiring harness (WP 0233).
Proceed to Test Step 8.
Test Step 8. Verify Malfunction is
Resolved.
1. Ensure all harness connectors are
connected.
2. At MSD, check for active
094-4 Fuel Pressure Sensor Voltage
diagnostic codes (WP 0008).
Below Normal Becomes Inactive
Proceed to step 3.
094-4 Fuel Pressure Sensor Voltage
Below Normal Remains Active
Repeat troubleshooting from the
beginning.
3. Install splash shield
(Figure 4, Item 4), four bushings
(Figure 4, Item 3), washers
(Figure 4, Item 2), and bolts
(Figure 4, Item 1) on machine.
Figure 4. Splash Shield and Retaining Hardware.
0030
4. Install left frame access plate
(WP 0376).
5. Troubleshooting complete.
END OF WORK PACKAGE