TM 5-3805-296-23-1
0030
Table 1. 0262 Five-Volt Sensor Supply Diagnostic Codes Continued.
030
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
2. Disconnect connector CM-C9
0262-04 Five-Volt Sensor DC
(WP 0012, Figure 26) from oil
Supply Voltage Below
pressure sensor connector
Normal Continued
(WP 0012, Figure 25).
3. Turn battery disconnect switch to
ON position and start engine
(TM 5-3805-296-10).
262-4 Five-Volt Sensor DC Supply
4. At MSD, check for active
Voltage Below Normal Remains
diagnostic code 262-4 Five-Volt
Active Proceed to Test Step 3.
Sensor DC Supply Voltage Below
262-4 Five-Volt Sensor DC Supply
Normal (WP 0008).
Voltage Below Normal Becomes
Inactive Replace oil pressure sensor
(WP 0187).
Proceed to Test Step 8.
Test Step 3. Test for Shorted
Atmospheric Pressure Sensor.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector CM-C4
(WP 0012, Figure 16) from
atmospheric pressure sensor
connector (WP 0012, Figure 15).
3. Turn battery disconnect switch to
ON position and start engine
(TM 5-3805-296-10).
4. At MSD, check for active
262-4 Five-Volt Sensor DC Supply
diagnostic code 262-4 Five-Volt
Voltage Below Normal Remains
Sensor DC Supply Voltage Below
Active Proceed to Test Step 4.
Normal (WP 0008).
262-4 Five-Volt Sensor DC Supply
Voltage Below Normal Becomes
Inactive Replace atmospheric
pressure sensor (WP 0244).
Proceed to Test Step 8.
Test Step 4. Test for Shorted Intake
Air Pressure Sensor.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector CM-C7
(WP 0012, Figure 22) from intake
air pressure sensor connector
(WP 0012, Figure 21).
3. Turn battery disconnect switch to
ON position and start engine
(TM 5-3805-296-10).
0030-9