TM 5-3805-296-23-1
0030
Table 1. 0262 Five-Volt Sensor Supply Diagnostic Codes Continued.
030
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Shorted Basic
0262-03 Five-Volt Sensor DC
Engine Wiring Harness.
Supply Voltage Above
1. Turn ignition switch and battery
Normal Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect the following:
a. Connector CM-C7
(WP 0012, Figure 22)
from intake air pressure
sensor connector
(WP 0012, Figure 21).
b. Connector CM-C9
(WP 0012, Figure 26) from oil
pressure sensor connector
(WP 0012, Figure 25).
c.
Connector CM-C4
(WP 0012, Figure 16)
from atmospheric pressure
sensor connector
(WP 0012, Figure 15).
d. Connector CL-C1
(WP 0012, Figure 45)
from engine ECM.
e. Connector CM-C1
(WP 0012, Figure 30)
from engine ECM.
3. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251).
between connector CM-C11
Proceed to Test Step 4.
terminal 5 (WP 0012, Figure 31)
No Continuity Proceed to step 4.
and all other terminals
in connector CM-C11
(WP 0012, Figure 31).
4. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251).
between connector CM-C1
Proceed to Test Step 4.
terminal 72 (WP 0012, Figure 30)
No Continuity Proceed to step 5.
and all other terminals
in connector CM-C1
(WP 0012, Figure 30).
0030-4