TM 5-3805-296-23-1
0031
Table 1. 0267 Engine Shutdown Switch Diagnostic Code Continued.
031
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 4. Test for Shorted Hood
0267-02 Engine Shutdown
Wiring Harness.
Switch Erratic, Intermittent,
1. Turn ignition switch and battery
or Incorrect Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector L-C1
(WP 0012, Figure 190)
from connector J-C2
(WP 0012, Figure 189).
3. Using digital multimeter
Continuity Replace hood wiring
(WP 0540), test for continuity
harness (WP 0389).
between connector L-C1
Proceed to Test Step 24.
terminal 3 (WP 0012, Figure 190)
No Continuity Proceed to step 4.
and all other terminals in
connector L-C1 (WP 0012,
Figure 190).
4. Using digital multimeter
Continuity Replace hood wiring
(WP 0540), test for continuity
harness (WP 0389).
between connector L-C1
Proceed to Test Step 24.
terminal 3 (WP 0012, Figure 190)
No Continuity Proceed to Test
and ground.
Step 5.
Test Step 5. Test Hood Wiring
Harness for High Resistance or
Open.
1. Connect jumper wire between
terminal A and terminal C
of connector L-C3
(WP 0012, Figure 223).
2. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 6.
between connector L-C1
Resistance Greater Than 5.0 Ohms
terminal 3 and terminal 5
Replace hood wiring harness
(WP 0012, Figure 190).
(WP 0389).
Proceed to Test Step 24.
Test Step 6. Test for Shorted Chassis
Wiring Harness.
1. Remove jumper wire from
terminal A and terminal C
of connector L-C3
(WP 0012, Figure 223).
2. Disconnect connector J-C8
(WP 0012, Figure 100)
from connector W-C1
(WP 0012, Figure 99).
0031-5
