TM 5-3805-296-23-1
0031
Table 1. 0267 Engine Shutdown Switch Diagnostic Code Continued.
031
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
4. Using digital multimeter
0267-02 Engine Shutdown
Continuity Replace main cab wiring
(WP 0540), test for continuity
Switch Erratic, Intermittent,
harness (WP 0505).
between connector W-C16
or Incorrect Continued
Proceed to Test Step 24.
terminal 31 (WP 0012, Figure 87)
No Continuity Proceed to step 5.
and all other terminals
in connector W-C16
(WP 0012, Figure 87).
5. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C16
Proceed to Test Step 24.
terminal 31 (WP 0012, Figure 87)
No Continuity Proceed to Test
and ground.
Step 9.
Test Step 9. Test Main Cab Wiring
Harness for High Resistance or
Open.
1. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to step 2.
between connector W-C1
Resistance Greater Than 5.0 Ohms
terminal 63 (WP 0012, Figure 99)
Replace main cab wiring harness
and connector W-C16 terminal 3
(WP 0505).
(WP 0012, Figure 87).
Proceed to Test Step 24.
2. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 10.
between connector W-C1
Resistance Greater Than 5.0 Ohms
terminal 61 (WP 0012, Figure 99)
Replace main cab wiring harness
and connector W-C16 terminal 31
(WP 0505).
(WP 0012, Figure 87).
Proceed to Test Step 24.
0031-7
