TM 5-3805-296-23-1
0031
Table 1. 0267 Engine Shutdown Switch Diagnostic Code Continued.
031
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 17. Test Main Cab Wiring
0267-02 Engine Shutdown
Harness for High Resistance or
Switch Erratic, Intermittent,
Open.
or Incorrect Continued
1. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to step 2.
between connector W-C1
Resistance Greater Than 5.0 Ohms
terminal 63 (WP 0012, Figure 99)
Replace main cab wiring harness
and connector W-C16 terminal 3
(WP 0505).
(WP 0012, Figure 87).
Proceed to Test Step 24.
2. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 18.
between connector W-C1
Resistance Greater Than 5.0 Ohms
terminal 61 (WP 0012, Figure 99)
Replace main cab wiring harness
and connector W-C16 terminal 31
(WP 0505).
(WP 0012, Figure 87).
Proceed to Test Step 24.
Test Step 18. Test for Shorted Engine
Interface Wiring Harness.
1. Lower left frame access plate
(WP 0376).
2. Remove four bolts
(Figure 3, Item 1), washers
(Figure 3, Item 2), bushings
(Figure 3, Item 3), and splash
shield (Figure 3, Item 4) from
machine.
Figure 3. Splash Shield and Retaining Hardware.
0031
3. Disconnect connector CM-C1
(WP 0012, Figure 30) from engine
ECM.
4. Disconnect connector CL-C1
(WP 0012, Figure 45) from engine
ECM.
