TM 5-3805-296-23-1
0031
Table 1. 0267 Engine Shutdown Switch Diagnostic Code Continued.
031
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
5. Using digital multimeter
0267-02 Engine Shutdown
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Switch Erratic, Intermittent,
Replace engine ECM (WP 0252).
between connector CL-C1
or Incorrect Continued
Proceed to Test Step 24.
terminal 5 and terminal 23
Resistance Greater Than 5.0 Ohms
(WP 0012, Figure 45).
Replace engine interface wiring
harness (WP 0211).
Proceed to Test Step 24.
Test Step 24. Verify Malfunction is
Resolved.
1. Ensure all harness connectors are
connected.
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
3. At MSD, check for active
267-2 Engine Shutdown Switch
diagnostic codes (WP 0008).
Erratic, Intermittent, or Incorrect
Becomes Inactive Proceed to step 6.
267-2 Engine Shutdown Switch
Erratic, Intermittent, or Incorrect
Remains Active Repeat
troubleshooting from the beginning.
4. If removed, install splash shield
(Figure 5, Item 4), four bushings
(Figure 5, Item 3), washers
(Figure 5, Item 2), and bolts
(Figure 5, Item 1) on machine.
Figure 5. Splash Shield and Retaining Hardware.
0031