TM 5-3805-296-23-1
0032
Table 1. 0268 Engine Control Module Diagnostic Code.
0032
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
0268-02 Programmed
Parameter Fault Erratic,
Perform this test only if condition is active.
Intermittent, or Incorrect
DIAGNOSTIC CODE SET CONDITION
Engine ECM Programming Incomplete.
POSSIBLE CAUSE
Missing System Configuration Parameter.
Missing Injector Trim File.
Test Step 1. Program Engine ECM
with Correct Software.
Refer to ECM Programming
Program engine ECM with correct soft-
ware (WP 0011). Clear diagnostic
fault code(s) (WP 0008). Verify
correct operation of machine
(TM 5-3805-296-10). Troubleshooting
complete.
END OF WORK PACKAGE
