TM 5-3805-296-23-1
0031
Table 1. 0267 Engine Shutdown Switch Diagnostic Code Continued.
031
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
3. Disconnect connector W-C16
0267-02 Engine Shutdown
(WP 0012, Figure 87)
Switch Erratic, Intermittent,
from connector CL-C3
or Incorrect Continued
(WP 0012, Figure 86).
4. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 23.
between connector W-C1
Resistance Greater Than 5.0 Ohms
terminal 61 (WP 0012, Figure 99)
Replace main cab wiring harness
and connector W-C16 terminal 31
(WP 0505).
(WP 0012, Figure 87).
Proceed to Test Step 24.
Test Step 23. Test Engine Interface
Wiring Harness for High Resistance
or Open.
1. Lower left frame access plate
(WP 0376).
2. Remove four bolts
(Figure 4, Item 1), washers
(Figure 4, Item 2), bushings
(Figure 4, Item 3), and splash
shield (Figure 4, Item 4) from
machine.
Figure 4. Splash Shield and Retaining Hardware.
0031
3. Connect jumper wire between
terminal 22 and terminal 31
of connector CL-C3
(WP 0012, Figure 86).
4. Disconnect connector CL-C1
(WP 0012, Figure 45) from engine
ECM.