TM 5-3805-296-23-1
0031
Table 1. 0267 Engine Shutdown Switch Diagnostic Code Continued.
031
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
2. Disconnect connector L-C1
0267-02 Engine Shutdown
(WP 0012, Figure 190)
Switch Erratic, Intermittent,
from connector J-C2
or Incorrect Continued
(WP 0012, Figure 189).
3. Connect jumper wire between
terminal A and terminal B
of connector L-C3
(WP 0012, Figure 223).
4. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 21.
between connector L-C1
Resistance Greater Than 5.0 Ohms
terminal 3 and terminal 4
Replace hood wiring harness
(WP 0012, Figure 190).
(WP 0389).
Proceed to Test Step 24.
Test Step 21. Test Chassis Wiring
Harness for High Resistance or
Open.
1. Remove jumper wire from
terminal A and terminal B
of connector L-C3
WP 0012, Figure 223).
2. Connect jumper wire between
terminal 3 and terminal 4
of connector J-C2
(WP 0012, Figure 189).
3. Disconnect connector J-C8
(WP 0012, Figure 100)
from connector W-C1
(WP 0012, Figure 99).
4. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 22.
between connector J-C8
Resistance Greater Than 5.0 Ohms
terminal 61 and terminal 62
Replace chassis wiring harness
(WP 0012, Figure 100).
(WP 0305).
Proceed to Test Step 24.
Test Step 22. Test Main Cab Wiring
Harness for High Resistance or
Open.
1. Remove jumper wire from
terminal 3 and terminal 4
of connector J-C2
(WP 0012, Figure 189).
2. Connect jumper wire between
terminal 61 and terminal 62
of connector W-C1
(WP 0012, Figure 99).
0031-14