TM 5-3895-376-14&P
4-28. FUEL FILTER MAINTENANCE INSTRUCTIONS
This task covers:
c. Replace
a. Cleaning
b. Remove
INITIAL SETUP
Equipment Condition
Tools
Engine stopped and cool
Tool Kit, General Mechanic's
Fuel tank drained.
Pan, Wash; item 38, Appx F
General Safety Instructions
Materials/Parts
Observe all WARNINGS and CAUTIONS
Brush, Cleaning; item 2, Appx E
Allow engine to cool before draining fuel.
Solvent, Dry Cleaning; item 9, Appx E
Fuel filter (1)
WARNING
P-D-680, Type III, is moderately toxic to the
skin, eyes and respiratory tract; avoid pro-
longed exposure. Skin and eye protection is
required. Good ventilation is required. Do
not use near open flame or excessive heat.
Flash point is 200 degrees F (93.3 degrees C).
1.
Clean fuel filter and surrounding area with a cloth
dampened in dry cleaning solvent and dry thor-
oughly. Use a soft-bristle brush to remove caked
dirt.
WARNING
Spilled fuel on a hot engine can ignite, caus-
ing damage to equipment and possible per-
sonal injury. Allow engine to cool before
draining fuel from unit.
1
Loosen clamps (1 and 2) sufficiently to relieve
compression on fuel lines.
4-52
