TM 5-3805-296-23-2
0146
Table 1. Left Rear Turn/Stop Light Does Not Operate Continued.
0146
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. Using digital multimeter
Left Rear Turn/Stop Light
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Does Not Operate
Proceed to Test Step 9.
between connector P-C2
Continued
Resistance Greater Than 5.0 Ohms
terminal 3 (WP 0012, Figure 265)
Replace dash wiring harness
and connector P-C1 terminal 45
(WP 0510).
(WP 0012, Figure 253).
Proceed to Test Step 17.
Test Step 9. Test Turn Signal Wiring
Harness for High Resistance or
Open.
1. Separate boot (Figure 3, Item 1)
from turn signal switch
(Figure 3, Item 4).
2. Disconnect terminal 540
(Figure 3, Item 2) from
turn signal switch terminal 6
(Figure 3, Item 3).
3. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Replace turn signal switch (WP 0525).
between connector N-C1
Proceed to Test Step 17.
terminal 3 (WP 0012, Figure 264)
Resistance Greater Than 5.0 Ohms
and terminal 540
Replace turn signal wiring harness
(Figure 3, Item 2).
(WP 0525).
Proceed to Test Step 17.
Figure 3. Turn Signal Switch and Wiring Harness.
0146