TM 5-3805-296-23-2
0146
Table 1. Left Rear Turn/Stop Light Does Not Operate Continued.
0146
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8. Using digital multimeter
Left Rear Turn/Stop Light
Continuity Replace tail lights/backup
(WP 0540), test for continuity
Does Not Operate
alarm wiring harness (WP 0351).
between connector AH-C1
Continued
Proceed to Test Step 17.
terminal 10 (WP 0012, Figure 325)
No Continuity Proceed to Test
and ground.
Step 11.
Test Step 11. Test for Shorted Draft
Frame and Bowl Side Wiring
Harness.
1. Disconnect connector AE-C1
(WP 0012, Figure 144)
from connector E-C2
(WP 0012, Figure 143).
2. Using digital multimeter
Continuity Replace draft frame and
(WP 0540), test for continuity
bowl side wiring harness (WP 0348).
between connector AE-C4
Proceed to Test Step 17.
terminal 10 (WP 0012, Figure 174)
No Continuity Proceed to step 3.
and all other terminals
in connector AE-C4
(WP 0012, Figure 174).
3. Using digital multimeter
Continuity Replace draft frame and
(WP 0540), test for continuity
bowl side wiring harness (WP 0348).
between connector AE-C1
Proceed to Test Step 17.
terminal 16 (WP 0012, Figure 144)
No Continuity Proceed to step 4.
and all other terminals
in connector AE-C1
(WP 0012, Figure 144).
4. Using digital multimeter
Continuity Replace draft frame and
(WP 0540), test for continuity
bowl side wiring harness (WP 0348).
between connector AE-C1
Proceed to Test Step 17.
terminal 16 (WP 0012, Figure 144)
No Continuity Proceed to Test
and ground.
Step 12.
Test Step 12. Test for Shorted Hitch
Wiring Harness.
1. Lower left frame access plate
(WP 0376).
2. Disconnect connector E-C3
(WP 0012, Figure 142)
from connector J-C6
(WP 0012, Figure 141).
3. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C2
Proceed to Test Step 17.
terminal 16 (WP 0012, Figure 143)
No Continuity Proceed to step 4.
and all other terminals
in connector E-C2
(WP 0012, Figure 143).
0146-10
