TM 5-3805-296-23-2
0099
Table 1. 0819 Display Data Link Diagnostic Code Continued.
099
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
3. Connect connector P-C19
0819-02 Display Data Link
(WP 0012, Figure 270) to
Erratic, Intermittent, or
speedometer/tachometer display
Incorrect Continued
module.
4. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
819-2 Display Data Link Erratic,
5. At MSD, check for active
Intermittent, or Incorrect Becomes
diagnostic code 819-2 Display
Inactive Proceed to step 6.
Data Link Erratic, Intermittent, or
819-2 Display Data Link Erratic,
Incorrect (WP 0008).
Intermittent, or Incorrect Remains
Active Proceed to Test Step 10.
6. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
7. Install instrument panel
(Figure 2, Item 3) with six bolts
(Figure 2, Item 4) on ROPS
(Figure 2, Item 5).
8. Install right vent (Figure 2, Item 7)
with two bolts (Figure 2, Item 6) on
instrument panel
(Figure 2, Item 3).
9. Install left vent (Figure 2, Item 2)
with two bolts (Figure 2, Item 1) on
instrument panel
(Figure 2, Item 3).
10. Install instrument panel cover
(Figure 1, Item 3) with six washers
(Figure 1, Item 2) and bolts
(Figure 1, Item 1) on ROPS
(Figure 1, Item 4).
11. Troubleshooting complete.
Test Step 10. Verify Operation of
Speedometer/Tachometer Display
Module.
Module Fails to Power Up or One or
Verify operation speedometer/
More Gauges Function Improperly
tachometer display module by
Replace speedometer/tachometer
performing Monitoring System Self-test
display module (WP 0506).
(WP 0177).
Proceed to Test Step 12.
No Problem Found Proceed to Test
Step 11.
0099-9