TM 5-3805-296-23-2
0099
Table 1. 0819 Display Data Link Diagnostic Code Continued.
099
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 6. Test Dash Panel Wiring
0819-02 Display Data Link
Harness for High Resistance or
Erratic, Intermittent, or
Open.
Incorrect Continued
1. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to step 2.
between connector P-C18
Resistance Greater Than 5.0 Ohms
terminal 15 (WP 0012, Figure 269)
Replace dash wiring harness
and connector P-C19 terminal 5
(WP 0510).
(WP 0012, Figure 270).
Proceed to Test Step 12.
2. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to step 3.
between connector P-C18
Resistance Greater Than 5.0 Ohms
terminal 25 (WP 0012, Figure 269)
Replace dash wiring harness
and connector P-C19 terminal 3
(WP 0510).
(WP 0012, Figure 270).
Proceed to Test Step 12.
3. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to step 4.
between connector P-C18
Resistance Greater Than 5.0 Ohms
terminal 34 (WP 0012, Figure 269)
Replace dash wiring harness
and connector P-C19 terminal 1
(WP 0510).
(WP 0012, Figure 270).
Proceed to Test Step 12.
4. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Step 5.
between connector P-C18
Resistance Greater Than 5.0 Ohms
terminal 35 (WP 0012, Figure 269)
Replace dash wiring harness
and connector P-C19 terminal 4
(WP 0510).
(WP 0012, Figure 270).
Proceed to Test Step 12.
5. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to step 6.
between connector P-C18
Resistance Greater Than 5.0 Ohms
terminal 15 (WP 0012, Figure 269)
Replace dash wiring harness
and connector P-C13 terminal 5
(WP 0510).
(WP 0012, Figure 268).
Proceed to Test Step 12.
6. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to step 7.
between connector P-C18
Resistance Greater Than 5.0 Ohms
terminal 25 (WP 0012, Figure 269)
Replace dash wiring harness
and connector P-C13 terminal 3
(WP 0510).
(WP 0012, Figure 268).
Proceed to Test Step 12.
7. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to step 8.
between connector P-C18
Resistance Greater Than 5.0 Ohms
terminal 34 (WP 0012, Figure 269)
Replace dash wiring harness
and connector P-C13 terminal 1
(WP 0510).
(WP 0012, Figure 268).
Proceed to Test Step 12.
0099-7