TM 5-3805-296-23-2
0099
Table 1. 0819 Display Data Link Diagnostic Code Continued.
099
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
6. Disconnect connector P-C19
0819-02 Display Data Link
(WP 0012, Figure 270) from
Erratic, Intermittent, or
speedometer/tachometer display
Incorrect Continued
module.
Speedometer/Tachometer Display
7. Inspect speedometer/tachometer
Module Damaged Replace
display module and harness
speedometer/tachometer display
connector P-C19 for damage
module (WP 0506).
(WP 0506 and WP 0540).
Proceed to Test Step 12.
Harness/Connector Damaged
Replace dash wiring harness
(WP 0510).
Proceed to Test Step 12.
No Problem Found Proceed to Test
Step 3.
Test Step 3. Inspect Quad Gauge
Display Module for Damage.
1. Disconnect connector P-C13
(WP 0012, Figure 268) from quad
gauge display module.
Quad Gauge Display Module
2. Inspect quad gauge display
Damaged Replace quad gauge
module and harness connector
display module (WP 0506).
P-C13 for damage (WP 0506 and
Proceed to Test Step 12.
WP 0540).
Harness/Connector Damaged
Replace dash wiring harness
(WP 0510).
Proceed to Test Step 12.
No Problem Found Proceed to Test
Step 4.
Test Step 4. Inspect Tractor Operator
Module for Damage.
1. Disconnect connector P-C18
(WP 0012, Figure 269) from tractor
operator monitor.
Tractor Operator Monitor Damaged
2. Inspect tractor operator monitor
and harness connector P-C18 for Replace tractor operator monitor
damage (WP 0506 and WP 0540). (WP 0506).
Proceed to Test Step 12.
Harness/Connector Damaged
Replace dash wiring harness
(WP 0510).
Proceed to Test Step 12.
No Problem Found Proceed to Test
Step 5.
0099-5