TM 5-3805-296-23-2
0099
Table 1. 0819 Display Data Link Diagnostic Code Continued.
099
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 5. Test for Shorted Dash
0819-02 Display Data Link
Panel Wiring Harness.
Erratic, Intermittent, or
Continuity Replace dash wiring
1. Using digital multimeter
Incorrect Continued
harness (WP 0510).
(WP 0540), test for continuity
Proceed to Test Step 12.
between connector P-C18
No Continuity Proceed to step 2.
terminal 15 (WP 0012, Figure 269)
and all other terminals in
connector P-C18 (WP 0012,
Figure 269).
2. Using digital multimeter
Continuity Replace dash wiring
(WP 0540), test for continuity
harness (WP 0510).
between connector P-C18
Proceed to Test Step 12.
terminal 15 (WP 0012, Figure 269)
No Continuity Proceed to step 3.
and ground.
3. Using digital multimeter
Continuity Replace dash wiring
(WP 0540), test for continuity
harness (WP 0510).
between connector P-C18
Proceed to Test Step 12.
terminal 25 (WP 0012, Figure 269)
No Continuity Proceed to step 4.
and all other terminals in
connector P-C18
(WP 0012, Figure 269).
4. Using digital multimeter
Continuity Replace dash wiring
(WP 0540), test for continuity
harness (WP 0510).
between connector P-C18
Proceed to Test Step 12.
terminal 25 (WP 0012, Figure 269)
No Continuity Proceed to step 5.
and ground.
5. Using digital multimeter
Continuity Replace dash wiring
(WP 0540), test for continuity
harness (WP 0510).
between connector P-C18
Proceed to Test Step 12.
terminal 34 (WP 0012, Figure 269)
No Continuity Proceed to step 6.
and all other terminals in
connector P-C18 (WP 0012,
Figure 269).
6. Using digital multimeter
Continuity Replace dash wiring
(WP 0540), test for continuity
harness (WP 0510).
between connector P-C18
Proceed to Test Step 12.
terminal 35 (WP 0012, Figure 269)
No Continuity Proceed to step 7.
and all other terminals in
connector P-C18 (WP 0012,
Figure 269).
7. Using digital multimeter
Continuity Replace dash wiring
(WP 0540), test for continuity
harness (WP 0510).
between connector P-C18
Proceed to Test Step 12.
terminal 35 (WP 0012, Figure 269)
No Continuity Proceed to Test
and ground.
Step 6.
0099-6