TM 5-3805-296-23-2
0080
Table 1. 1292 Transmission Hold Push Switch Diagnostic Codes Continued.
080
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
1292-04 Gear Hold Switch
Voltage Below Normal
Continued
Figure 4. Gear Hold Switch Status.
0080
Test Step 6. Test for Shorted Fuse
Panel Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector CG-C1
(WP 0012, Figure 283)
from connector W-C8
(WP 0012, Figure 282).
3. Using digital multimeter
Continuity Replace fuse panel wiring
(WP 0540), test for continuity
harness (WP 0515).
between connector CG-C1
Proceed to Test Step 8.
terminal 58 (WP 0012, Figure 283)
No Continuity Proceed to step 4.
and all other terminals
in connector CG-C1
(WP 0012, Figure 283).