TM 5-3805-296-23-2
0080
Table 1. 1292 Transmission Hold Push Switch Diagnostic Codes Continued.
080
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Inspect Implement
1292-07 Gear Hold Switch
Control Joystick Assembly.
Mechanical System Not
1. Turn ignition switch and battery
Responding Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Inspect implement control joystick
Joystick Assembly OK Proceed to
assembly for damage (WP 0503).
step 3.
Joystick Assembly Damaged
Replace implement control joystick
(WP 0503).
Proceed to Test Step 4.
3. Press and release gear hold
Button Operates Properly Proceed
to Test Step 3.
button several times
Button Fails to Operate Properly
(TM 5-3805-296-10).
Replace implement control joystick
(WP 0503).
Proceed to Test Step 4.
Test Step 3. Test Function of XMSN
Gear Hold Switch Circuits.
1. Disconnect connector CG-C14
(WP 0012, Figure 302) from
implement control joystick
connector (WP 0012, Figure 300).
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
3. On MSD, select Information
(Figure 5, Item 1) and Status
(Figure 5, Item 2).
0080-18