TM 5-3805-296-23-2
0080
Table 1. 1292 Transmission Hold Push Switch Diagnostic Codes Continued.
080
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
5. Using digital multimeter
1292-04 Gear Hold Switch
Continuity Replace main cab wiring
(WP 0540), test for continuity
Voltage Below Normal
harness (WP 0505).
between connector W-C12
Continued
Proceed to Test Step 8.
terminal 37 (WP 0012, Figure 88)
No Continuity Proceed to step 6.
and all terminals in connector
W-C13 (WP 0012, Figure 89).
6. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C12
Proceed to Test Step 8.
terminal 37 (WP 0012, Figure 88)
No Continuity Replace transmission/
and ground.
chassis ECM (WP 0495).
Proceed to Test Step 8.
Test Step 5. Test Function of XMSN
Gear Hold Switch Circuits.
1. On MSD, select Information
(Figure 3, Item 1) and Status
(Figure 3, Item 2).
Figure 3. Accessing Status Screen.
0080