TM 5-3805-296-23-1
0064
Table 1. 0700 Transmission Gear Position Sensor Diagnostic Codes Continued.
064
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
5. Using digital multimeter
0700-03 Transmission Gear
Continuity at Any Test Point
(WP 0540), test for continuity
Sensor Voltage Above
Replace main cab wiring harness
between the following:
Normal Continued
(WP 0505).
a. Connector W-C12 terminal 39
Proceed to Test Step 13.
(WP 0012, Figure 88) and all
No Continuity at Any Test Point
terminals in connector W-C13
Replace transmission/chassis ECM
(WP 0012, Figure 89).
(WP 0495).
Proceed to Test Step 13.
b. Connector W-C12 terminal 28
(WP 0012, Figure 88) and all
terminals in connector W-C13
(WP 0012, Figure 89).
c.
Connector W-C12 terminal 29
(WP 0012, Figure 88) and all
terminals in connector W-C13
(WP 0012, Figure 89).
d. Connector W-C12 terminal 30
(WP 0012, Figure 88) and all
terminals in connector W-C13
(WP 0012, Figure 89).
e. Connector W-C12 terminal 31
(WP 0012, Figure 88) and all
terminals in connector W-C13
(WP 0012, Figure 89).
f.
Connector W-C12 terminal 55
(WP 0012, Figure 88) and all
terminals in connector W-C13
(WP 0012, Figure 89).
0064-33
