TM 5-3805-296-23-1
0064
Table 1. 0700 Transmission Gear Position Sensor Diagnostic Codes Continued.
064
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 5. Test for Shorted Main
0700-03 Transmission Gear
Cab Wiring Harness.
Sensor Voltage Above
1. Disconnect connector W-C12
Normal Continued
(WP 0012, Figure 88) from
transmission/chassis ECM.
2. Disconnect connector W-C13
(WP 0012, Figure 89) from
transmission/chassis ECM.
3. Using digital multimeter
Continuity at Any Test Point
(WP 0540), test for continuity
Replace main cab wiring harness
between the following:
(WP 0505).
a. Connector W-C1 terminal 39
Proceed to Test Step 13.
(WP 0012, Figure 99) and all
No Continuity at Any Test Point
other terminals in connector
Proceed to step 4.
W-C1 (WP 0012, Figure 99).
b. Connector W-C1 terminal 38
(WP 0012, Figure 99) and all
other terminals in connector
W-C1 (WP 0012, Figure 99).
c.
Connector W-C1 terminal 37
(WP 0012, Figure 99) and all
other terminals in connector
W-C1 (WP 0012, Figure 99).
d. Connector W-C1 terminal 64
(WP 0012, Figure 99) and all
other terminals in connector
W-C1 (WP 0012, Figure 99).
e. Connector W-C1 terminal 35
(WP 0012, Figure 99) and all
other terminals in connector
W-C1 (WP 0012, Figure 99).
f.
Connector W-C1 terminal 34
(WP 0012, Figure 99) and all
other terminals in connector
W-C1 (WP 0012, Figure 99).
0064-31