TM 5-3805-296-23-1
0064
Table 1. 0700 Transmission Gear Position Sensor Diagnostic Codes Continued.
064
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
All Values Change as Specified
2. On MSD, select applicable status
0700-03 Transmission Gear
group (Figure 6, Item 1). View
Replace tractor actual gear switch
Sensor Voltage Above
displayed Value (Figure 6, Item 3)
(WP 0273).
Normal Continued
for each Gear Code (Figure 6,
Proceed to Test Step 13.
Item 2) while performing the
One or More Values Fail to Change
following:
as Specified Replace transmission/
a. Connect jumper wire between
chassis ECM (WP 0495).
terminal 3 and 10 of
Proceed to Test Step 13.
connector AG-C1
(WP 0012, Figure 120).
Remove jumper wire. Gear
Code #1 Value changes from
Open to Grounded to Open.
b. Connect jumper wire between
terminal 9 and 10 of
connector AG-C1
(WP 0012, Figure 120).
Remove jumper wire. Gear
Code #2 Value changes from
Open to Grounded to Open.
c.
Connect jumper wire between
terminal 4 and 10 of
connector AG-C1
(WP 0012, Figure 120).
Remove jumper wire. Gear
Code #3 Value changes from
Open to Grounded to Open.
d. Connect jumper wire between
terminal 7 and 10 of
connector AG-C1
(WP 0012, Figure 120).
Remove jumper wire. Gear
Code #4 Value changes from
Open to Grounded to Open.
e. Connect jumper wire between
terminal 1 and 10 of
connector AG-C1
(WP 0012, Figure 120).
Remove jumper wire. Gear
Code #5 Value changes from
Open to Grounded to Open.
f.
Connect jumper wire between
terminal 6 and 10 of
connector AG-C1
(WP 0012, Figure 120).
Remove jumper wire. Gear
Code Ground Verify Value
changes from Open to
Grounded to Open. Actual
Gear Value changes from
Abnormal/Incorrect Data to
Neutral to Abnormal/Incorrect
Data.
0064-35