TM 5-3805-296-23-1
0059
Table 1. 0562 Monitoring System Diagnostic Codes Continued.
059
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 9. Inspect Ground Point of
0562-02 Caterpillar
Cab Wiring Harness.
Monitoring System Incorrect
1. Turn ignition switch and battery
Signal Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Remove six bolts
(Figure 4, Item 1), washers
(Figure 4, Item 2), and step
(Figure 4, Item 3) from cab
(Figure 4, Item 4).
Figure 4. Cab Step.
0059
3. Inspect ground point of cab wiring
Ground Point or Ring Terminal Dirty
harness (WP 0012, Figure 316) for
or Corroded Clean as necessary.
dirt, corrosion, and damage.
Proceed to Test Step 13.
Ring Terminal Defective Replace
main cab wiring harness (WP 0505).
Proceed to Test Step 13.
No Problem Found Proceed to Test
Step 10.
Test Step 10. Verify if Code is Still
Active.
1. Ensure all harness connectors are
connected.
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).