TM 5-3805-296-23-1
0057
Table 1. 0358 Pilot Pressure Supply Solenoid Valve Diagnostic Codes Continued.
057
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 1. Test for Shorted Pilot
0358-06 Implement Pilot
Solenoid.
Pressure Supply Solenoid
1. Turn ignition switch and battery
Valve Current Above Normal
disconnect switch to OFF position
Continued
(TM 5-3805-296-10).
2. Disconnect connector A-C3
(WP 0012, Figure 110) from
pilot solenoid connector
(WP 0012, Figure 109).
3. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
4. At MSD, check for active
358-5 Implement Pilot Pressure
diagnostic code 358-6 Implement
Supply Solenoid Valve Current
Pilot Pressure Supply Solenoid
Below Normal Becomes Active
Valve Current Above Normal
Replace pilot solenoid (WP 0321).
Proceed to Test Step 5.
358-6 Implement Pilot Pressure
Supply Solenoid Valve Current
Above Normal Remains Active
Proceed to Test Step 2.
Test Step 2. Test for Shorted
Transmission Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector A-C1
(WP 0012, Figure 106)
from connector J-C3
(WP 0012, Figure 101).
3. Using digital multimeter
Continuity Replace transmission
(WP 0540), test for continuity
wiring harness (WP 0266).
between connector A-C1
Proceed to Test Step 5.
terminal 8 (WP 0012, Figure 106)
No Continuity Proceed to step 4.
and all other terminals
in connector A-C1
(WP 0012, Figure 106).
4. Using digital multimeter
Continuity Replace transmission
(WP 0540), test for continuity
wiring harness (WP 0266).
between connector A-C1
Proceed to Test Step 5.
terminal 8 (WP 0012, Figure 106)
No Continuity Proceed to Test
and ground.
Step 3.
0057-8