TM 5-3805-296-23-1
0019
Table 1. 0041 Eight-Volt Sensor Supply Diagnostic Codes Continued.
019
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0041-04 8 Volt DC Supply
Test Step 4. Verify Malfunction is
Voltage Below Normal
Resolved.
Continued
1. Ensure all harness connectors are
connected.
2. If removed, install splash shield
(Figure 4, Item 4), four bushings
(Figure 4, Item 3), washers
(Figure 4, Item 2), and bolts
(Figure 4, Item 1) on machine.
Figure 4. Splash Shield and Retaining Hardware.
0019
3. Install left frame access plate
(WP 0376).
4. At MSD, check for active
41-4 8 Volt DC Supply Voltage Below
diagnostic codes (WP 0008).
Normal Becomes Inactive
Troubleshooting complete.
41-4 8 Volt DC Supply Voltage Below
Normal Remains Active Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE