TM 5-3805-296-23-1
0020
Table 1. 0091 Throttle Position Sensor Diagnostic Code Continued.
020
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
4. Remove four bolts
0091-08 Throttle Position
(Figure 2, Item 1), washers
Sensor Abnormal
(Figure 2, Item 2), bushings
Frequency, Pulse Width, or
(Figure 2, Item 3), and splash
Period Continued
shield (Figure 2, Item 4) from
machine.
Figure 1. Splash Shield and Retaining Hardware.
0020
5. Disconnect connector CL-C1
(WP 0012, Figure 45) from engine
ECM.
6. Inspect connector CL-C1
Connector CL-C1 Damaged
(WP 0012, Figure 45) and engine
Replace engine interface wiring
ECM for damage IAW Electrical
harness (WP 0211).
General Maintenance Procedures
Proceed to Test Step 14.
(WP 0540).
Engine ECM Damaged Replace
engine ECM (WP 0252).
Proceed to Test Step 14.
No problem found Proceed to Test
Step 6.