TM 5-3805-296-23-1
0020
Table 1. 0091 Throttle Position Sensor Diagnostic Code Continued.
020
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 12. Test Main Cab Wiring
0091-08 Throttle Position
Harness for High Resistance or
Sensor Abnormal
Open.
Frequency, Pulse Width, or
1. Turn ignition switch and battery
Period Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector W-C16
(WP 0012, Figure 87)
from connector CL-C3
(WP 0012, Figure 86).
3. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 13.
between connector W-C30
Resistance Greater Than 5.0 Ohms
terminal C (WP 0012, Figure 81)
Replace main cab wiring harness
and connector W-C16 terminal 29
(WP 0505).
(WP 0012, Figure 87).
Proceed to Test Step 14.
Test Step 13. Test Engine Interface
Wiring Harness for High Resistance
or Open.
1. Remove four bolts
(Figure 4, Item 1), washers
(Figure 4, Item 2), bushings
(Figure 4, Item 3), and splash
shield (Figure 4, Item 4) from
machine.
Figure 4. Splash Shield and Retaining Hardware.
0020