TM 5-3805-296-23-1
0020
Table 1. 0091 Throttle Position Sensor Diagnostic Code Continued.
020
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Check for Other Active
0091-08 Throttle Position
Codes.
Sensor Abnormal
1. Turn battery disconnect switch and
Frequency, Pulse Width, or
ignition switch to ON position
Period Continued
(TM 5-3805-296-10).
2. Connect MSD. Select C15 620
41-3 8 Volt DC Supply Voltage Above
and check for active diagnostic
Normal is Active Diagnose and
code 41-3 8 Volt DC Supply
repair active code (WP 0019).
Voltage Above Normal or code 41-
41-4 8 Volt DC Supply Voltage Below
4 8 Volt DC Supply Voltage Below
Normal is Active Diagnose and
Normal (WP 0008).
repair active code (WP 0019).
Only 91-8 Throttle Position Sensor
Abnormal Frequency, Pulse Width,
or Period Active Proceed to Test
Step 3.
Test Step 3. Inspect Main Cab WIring
Harness and Tractor Throttle Sensor
Connectors.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Lower left frame access plate
(WP 0376).
3. Disconnect connector W-C30
(WP 0012, Figure 81) from tractor
throttle sensor connector
(WP 0012, Figure 80).
4. Inspect connector W-C30
Connector W-C30 Damaged
(WP 0012, Figure 81) and tractor
Replace main cab wiring harness
throttle sensor connector
(WP 0505).
(WP 0012, Figure 80) for damage
Proceed to Test Step 14.
IAW Electrical General
Tractor Throttle Sensor Connector
Maintenance Procedures
Damaged Replace governor control
(WP 0540).
pedal assembly (WP 0526).
Proceed to Test Step 14.
No problem found Proceed to Test
Step 4.
0020-3
