TM 5-3805-296-23-1
0019
Table 1. 0041 Eight-Volt Sensor Supply Diagnostic Codes Continued.
019
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Shorted Main
0041-04 8 Volt DC Supply
Cab Wiring Harness.
Voltage Below Normal
1. Turn ignition switch and battery
Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector W-C16
(WP 0012, Figure 87)
from connector CL-C3
(WP 0012, Figure 86).
3. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C16
Proceed to Test Step 4.
terminal 28 (WP 0012, Figure 87)
No Continuity Proceed to step 4.
and all other terminals
in connector W-C16
(WP 0012, Figure 87).
4. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C16
Proceed to Test Step 4.
terminal 28 (WP 0012, Figure 87)
No Continuity Proceed to Test
and ground.
Step 3.
Test Step 3. Test for Shorted Engine
Interface Wiring Harness.
1. Remove four bolts
(Figure 3, Item 1), washers
(Figure 3, Item 2), bushings
(Figure 3, Item 3), and splash
shield (Figure 3, Item 4) from
machine.
Figure 3. Splash Shield and Retaining Hardware.
0019
