TM 9-4940-568-34
3-80
3-22. CABLE FOLLOWER REPLACEMENT/REPAIR
THIS TASK COVERS:
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SETUP
Tools
Tool Kit, General Mechanic’s
(Item 67, Appendix F)
Materials/Parts
Sealing compound (Item 29, Appendix B)
Equipment Condition
FRS unloaded, crane in operating position
(TM 9-4940-568-10).
Hoist assembly removed (para 3-26).
a.
Removal
WARNING
Use
care
when
removing
springs. Springs are under ten-
sion and can act as projectiles
when released. Failure to com-
ply may result in injury to person-
nel.
(1) Remove two screws (1), six thrust
washers (2), and cable follower (3) from
hoist assembly (4).
NOTE
Roller guide removed for clarity.
b.
Disassembly
(1) Remove two springs (5) from posts (6).
(2) Remove two screws (7), washers (8),
thrust washers (9), rollers (10), and
washers (11) from shaft (12).
(3) Remove two bearings (13) from rollers
Roller Guide shown
removed for clarity.
NOTE
