TM 9-4940-568-34
3-81
(4) Remove shaft (12), two washers (14),
washers (15), and roller (16) from
control levers (17).
(5) Remove bearing (18) from roller (16).
(6) Remove two screws (19), washers (20),
and posts (6) from manual levers (21).
(7) Remove two nuts (22), screws (23),
control levers (17), and manual levers
(21) from spacers (24).
c. Assembly
(1) Install two control levers (17) and
manual levers (21) on spacers (25) with
two screws (23) and nuts (22).
(2) Install two posts (6) on manual levers
(21) with two washers (20) and screws
(19).
(3) Install bearing (18) in roller (16).
(4) Position two washers (15), washers
(14), and roller (16) in control levers (17)
with shaft (12).
