TM 9-4940-568-34
3-84
3-23. PROXIMITY SENSOR REPLACEMENT (Continued)
(3) Remove two screws (7), lockwashers
(8), washers (9), and plate (10) from
bracket (5). Discard lockwashers.
(4) Remove nut (11) and proximity sensor
(12) from plate (10).
b.
Installation
(1) Remove nut (11) from proximity sensor
(12).
(2) Install proximity sensor (12) in plate (10)
with nut (11).
(3) Apply sealing compound to threads of
two screws (7).
(4) Install plate (10) on bracket (5) with two
washers (9), lockwashers (8), and
screws (7).
(5) Apply sealing compound to threads of
two screws (3).
(6) Install bracket (5) on hoist assembly (6)
with two washers (4) and screws (3).
Tighten screws to 68 lb-ft (92 N.m).
NOTE
Install cable ties as required.
(7) Connect connector (1) to overload
shutdown box (2).
