TM 9-2330-389-14&P
5-2.
INSTALL TRACKED SUSPENSION (Con't).
10.
Repeat steps 5 through 9 for right side of trailer.
11.
Remove four screws (42), four lockwashers (43), four nuts (44), and left and right rear and side reflectors (45).
Discard lockwashers.
NOTE
· The two rear, two center, and two forward mounting brackets are required only
for the MOD zero (MOD 0) MICLICs, NSN 1055-01-203-5883. MOD one (MOD 1)
MICLICs, NSN 1055-01-281-2770, do not require the above six brackets. For
further information, see TM 9-1375-215-14&P.
· If trailer does not need rear, center, and forward mounting brackets, omit
brackets 46, 47, and 48 in step 12, and omit steps 13, 14, and 15 entirely.
12.
All fabricated parts are listed in Appendix G. Fabricate and paint two rear mounting brackets (46), two center
mounting brackets (47), two forward mounting brackets (48), two rear fenders (49), two upper fender supports
(50), four tiedowns (51), one left lower fender support (52), one right lower fender support (53), and two MICLIC
tiedowns (54) in accordance with Appendix G, Illustrated List of Manufactured Items. Do not paint tiedowns and
fender supports at this time.
5-7
