TM 9-2330-389-14&P
5-2.
INSTALL TRACKED SUSPENSION (Con't).
WARNING
Use protective Clothing, an OSHA/MSA approved breathing apparatus, and work in
a well-ventilated area when grinding and welding/cutting on chemical agent
resistant coating (CARC) painted surfaces. CARC is a proven carcinogen and,
under these conditions, is hazardous to human health.
CAUTION
To prevent damage to electrical wiring and brakelines when welding or cutting,
protect with shielding.
5.
Fabricate fender template in accordance with Appendix G. Illustrated List of Manufactured Items.
6.
Place template (35) on left rear fender (36) and mark area of fender to be removed. Cut area to be removed from
fender (36) and discard.
7.
Cut left front leveling jack mounting bracket (37) from trailer frame (38) and discard.
8.
Cut left rear tiedown (39) from trailer frame (38) and discard. Cut left center lifting eye (40) from trailer frame (41)
and discard.
9.
Grind smooth all rough surfaces of trailer frame (38 and 41) created by steps 6, 7, and 8.
5-6
