TM 9-2330-389-14&P
5-2.
INSTALL TRACKED SUSPENSION (Con't).
14.
Using slings and a wheel-mounted crane, raise bed of trailer (1) high enough to permit axle/tire assembly (29) to
be removed from under trailer (1).
15.
Remove the two rear jack stands and roll axle/tire assembly (29) out from under rear of trailer (1) and store for
future use.
16.
Position two jack stands under rear corners of trailer (1) and lower trailer (1). Remove lifting slings.
b.
M200A1 TRAILER MODIFICATIONS:
1.
Remove cotter pin (30) from rear leveling jack mounting bolt (31). Discard cotter pin.
2.
Remove mounting bolt (31) and castellated nut (32) from leveling jack (33) and mounting brackets (34).
3.
Remove leveling jack (33) from mounting brackets (34) and reinstall mounting bolt (31) and castellated nut (32) in
leveling jack (33) and return to supply system.
4.
Repeat steps 1 through 3 for opposite-side leveling jack.
5-5
