TM 9-2330-389-14&P
5-2.
INSTALL TRACKED SUSPENSION (Con't).
25.
Position one tiedown (51) on center of left forward reinforcement plate (70) and weld in place.
26.
Position a second tiedown (51) on rear of left trailer rail (55) 1/2 inch away from old leveling jack mounting bracket
(60) and weld into place.
27.
Position one MICLIC tiedown (54) even with left rear leveling jack bracket (60) and rear trailer support, then weld
in place.
28.
Repeat steps 25 through 27 for right side of trailer.
29.
Position one upper fender support (50) between left rear leveling jack bracket (60) and rear frame support. Weld
into place by filling holes drilled in step 16.
30.
Position left lower fender support (52) on left rear trailer frame and weld into place.
31.
Repeat steps 29 and 30 for right side of trailer.
32.
Grind smooth weld-filled holes on rear of trailer frame created in step 29.
33.
Install rear fender (49) in position at rear of trailer rail (55) and old leveling jack mounting bracket (60) with four
hex head bolts (71), hex nuts (72), flat washers (73), and lockwashers (74).
34.
Repeat step 33 for right side of trailer.
5-10
