TM 5-3895-376-14&P
5-5. FUEL PUMP MAINTENANCE INSTRUCTIONS - Continued
when throttle control is moved toward full
d.
Place the throttle lever in the full load position
speed.
and pull the primer.
3.
If installing a new gear housing or camshaft/gear,
e. Carefully install the fuel pump ensuring that
proceed as follows:
the pin on the fuel lever of the pump engages
the yoke of the control arm on the speed con-
a.
Perform steps 2a and 2b.
trol shaft.
Perform the installation depth measurements
b.
NOTE
of ADJUST instructions in selecting shims (4)
When installing pump with the gear cover
for initial fuel pump (3) installation.
installed, manually set the fuel lever (10),
of the fuel pump to the maximum, clock-
Perform the fuel pump timing check, and
C.
wise position to aid in engaging the yoke
make adjustments to shims (4) as determined.
of control arm.
d. Complete installation by performing steps 2e
f.
Secure fuel pump (3) with nuts (1) and lock-
through 2g.
washers (2), tightening nuts to 21 - 25 ft-lbs
(28 - 34 Nm) with torque wrench.
NOTE
Follow-on tasks include: connect fuel lines
g.
Remove inspection cover plate (Para. 5-14).
(Para. 4-29), Install v-belt cover (Para. 4-
Check clearance at governor pin. No play
should be detected when throttle lever is in
the stop position, and free play detected
5-11
