TM 5-3895-376-14&P
4-24. V-BELT COVER MAINTENANCE
INSTRUCTIONS
This task Includes:
c Inspection.
a Remove.
d. Installation.
b. Cleaning.
INITIAL SETUP
Equipment Condition
Tools
Compactor set on level ground in protected area.
Tool Kit, General Mechanic's
Engine off
Materials/Parts
Solvent, Dry Cleaning; Item 9, Appx E.
Lockwashers (4)
NOTE
1.
Remove four capscrews (1), lockwashers (2) and
flat washers (3).
If a replacement v-belt cover (4) is being in-
stalled, install new warning decal and
2.
Remove v-belt cover (4) from engine crankcase.
transfer the identification plate (Para. 4-17).
1.
Install v-belt cover (4) on engine crankcase, align-
ing mounting holes.
WARNING
2.
Secure with four capscrews (1), lockwashers (2)
and flat washers (3). Tighten capscrews securely.
P-D-680, Type Ill, is moderately toxic to
the skin, eyes and respiratory tract;
NOTE
avoid prolonged exposure. Skin and
eye protection is required. Good ventila-
Follow-on tasks include: Return compactor
tion is required. Do not use near open
to service.
flame or excessive heat. Flash point is
200 F (93.3 C).
Clean all parts in dry cleaning solvent and dry
thoroughly.
Inspect v-belt cover (4) for cracks or other dam-
1.
age.
2.
Inspect capscrews (1) for damaged threads.
3.
Replace any damaged or missing parts.
4-41