TM 5-3805-296-23-6
0388
DISASSEMBLY
000388
WARNING
To avoid injury, eye protection required when removing tread plates.
Failure to follow this warning may result in injury to personnel.
NOTE
Note position of bracket and tread plates to aid in installation.
1. Remove locknut (Figure 9, Item 2), washer (Figure 9, Item 3), bolt (Figure 9, Item 5), washer
(Figure 9, Item 4), and bracket (Figure 9, Item 6) from hood (Figure 9, Item 1). Discard locknut.
2. Using 3/16" drill bit, drill out 22 pop rivets (Figure 9, Item 7) and two tread plates (Figure 9, Item 8) from hood
(Figure 9, Item 1). Discard pop rivets.
Figure 9. Latch and Tread Plates.
0388