TM 5-3805-296-23-5
0297
INSTALLATION
000297
NOTE
Remove plugs and caps from fittings and steering control valve.
Install fittings as marked during removal.
1. Install steering control valve bracket (Figure 7, Item 12), three washers (Figure 7, Item 2), and bolts
(Figure 7, Item 1) on steering control valve (Figure 6, Item 3).
2. Install new O-ring (Figure 7, Item 10) on fitting (Figure 7, Item 8).
3. Install washer (Figure 7, Item 7) and fitting (Figure 7, Item 8) on steering control valve (Figure 7, Item 3).
Tighten nut (Figure 7, Item 11).
4. Install cap (Figure 7, Item 9) on fitting (Figure 7, Item 8).
5. Install five new O-rings (Figure 7, Item 6) on fittings (Figure 7, Item 4).
6. Install five fittings (Figure 7, Item 4) on steering control valve (Figure 7, Item 3). Tighten nuts (Figure 7, Item 5).
Figure 7. Steering Control Valve Bracket.
0297