TM 5-3805-296-23-5
0297
REMOVAL CONTINUED
NOTE
Mark position of fittings on steering control valve to aid in installation.
Cap and plug fittings and steering control valve to prevent contamination.
24. Loosen five nuts (Figure 6, Item 5) and remove fittings (Figure 6, Item 4) from steering control valve
(Figure 6, Item 3).
25. Remove five O-rings (Figure 6, Item 6) from fittings (Figure 6, Item 4). Discard O-rings.
26. Loosen nut (Figure 6, Item 11) and remove fitting (Figure 6, Item 8) and washer (Figure 6, Item 7) from steering
control valve (Figure 6, Item 3).
27. Remove O-ring (Figure 6, Item 10) from fitting (Figure 6, Item 8). Discard O-ring.
28. Remove cap (Figure 6, Item 9) from fitting (Figure 6, Item 8).
29. Remove three bolts (Figure 6, Item 1), washers (Figure 6, Item 2), and steering control valve bracket
(Figure 6, Item 12) from steering control valve (Figure 6, Item 3).
Figure 6. Steering Control Valve Bracket.
0297
END OF TASK
CLEANING AND INSPECTION
000297
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK